Standard Mode Standard Mode 1. The roller should be cleaned whenever it has been in contact with foreign materials such as dust or adhesives. Easy-to-use design allows convenient loading of M ribbon and 6″ OD media roll in under a minute. Page 29 occur, especially for small-size labels less than 20mm in height. Press and hold the feed button.
|Date Added:||2 December 2004|
|File Size:||9.71 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Caring For The Printer 6.
Loading Ribbon Loading Ribbon Note: Select the port of the printer and click “Next”. Id Card Printing Machine.
Put back gear 27 and gear Press and hold the pause button. Leading edge design brings more performance and functionality to make Rplus the ideal choice as an industrial printer for easy operation at the lowest cost. Rplus leads industrial level printers in affordability and ease of handling. Commercial Barcode Printers RS.
Argox R plus | RBS Ltd
Alternatively you can connect the printer with a serial cable to the RSC port of your computer or terminal. Loading Media R-Series printers can be operated in three different options: Leading edge design brings more performance and functionality to make R the ideal choice as an industrial printer for easy operation at the lowest cost.
Easy-to-use design allows convenient loading of M ribbon and 6″ OD media roll in under rr minute. Page 69 Remove the E- ring Igear 27 and release the screw F.
Caring for the printer Before maintenance be sure to turn off the printer power. The driver should now be installed.
Argox R-400 plus
Movable reflective sensor makes it easy to detect variable media with PC Bitmapped font: Powered by WordPress Theme Designed by: The user is cautioned that any changes or modifications not expressly approved by Argox Information Co. Signal Description No function Dispenser Kit installation 1.
Performing Calibration Performing Calibration After the media loaded, it is arglx to do the calibration for the label size detection. Leading edge design brings more performance and functionality to make Rplus the ideal choice as an desktop printer for easy operation at the lowest cost.
Remove gear 27 and Turn on the printer and press feed button. Turn off the printer.
Plug spring—peeler 83 into the right hole on chassis 2 and lock screw F up. Ribbon sensor Replace the ribbon not for direct thermal.
Argox R Plus Barcode Printer – Adsonic, Chennai | ID:
Press the cover locks on both sides to swing the top cover toward the rear and expose the media compartment. Page 55 Ribbon roll — max 2. Push down peeler-switch to ease the access packing paper.
Plug the power cable into the power socket on the wall, and then connect the other end of the cable to printer’s power socket. Instead of the flash prompt above, another way to install Seagull driver is to run the DriverWizard utility from the Installation Directory where the Seagull driver files locates. Movable reflective sensor makes it easy to detect variable media with 10mm to mm width.